✨ New Arrivals Just Dropped!Explore
Product image 1
HomeStore

Navico 9-Pin Dual Mix & Match Cable f/Dual Element Transducers

Navico 9-Pin Dual Mix & Match Cable f/Dual Element Transducers

Navico 9-Pin Dual Mix & Match Cable for Dual Element Transducers

For dual-socket Navico/Lowrance/Simrad xSonic 9-pin equipment

Mix and Match Cables for CHIRP Transducers

Many CHIRP transducers are now made as Mix and Match models. These versions have a common base transducer with an attached 9-meter cable, plus an interchangeable short (1-meter) brand-specific adapter cable.

The permanently-attached 9-meter cable ends in an Airmar 12-pin connector. This cable is run up through the boat to the equipment location. The short adapter cable connects to the transducer cable at one end and to the equipment at the other end.

Both parts are needed for an installation. If the user changes equipment brand at some later time, the transducer and its attached cable can be left in place and only the adapter cable needs to be replaced.

Note that CHIRP Mix and Match cables cannot be used with conventional 50/200kHz transducers.

$179.88
Navico 9-Pin Dual Mix & Match Cable f/Dual Element Transducers—
$179.88

Product Information

Shipping & Returns

Description

Navico 9-Pin Dual Mix & Match Cable for Dual Element Transducers

For dual-socket Navico/Lowrance/Simrad xSonic 9-pin equipment

Mix and Match Cables for CHIRP Transducers

Many CHIRP transducers are now made as Mix and Match models. These versions have a common base transducer with an attached 9-meter cable, plus an interchangeable short (1-meter) brand-specific adapter cable.

The permanently-attached 9-meter cable ends in an Airmar 12-pin connector. This cable is run up through the boat to the equipment location. The short adapter cable connects to the transducer cable at one end and to the equipment at the other end.

Both parts are needed for an installation. If the user changes equipment brand at some later time, the transducer and its attached cable can be left in place and only the adapter cable needs to be replaced.

Note that CHIRP Mix and Match cables cannot be used with conventional 50/200kHz transducers.

You may also like

-70%NEW
Thumbnail 1

TM165HW Chirp High Wide 600W Transom Mount Transducer - Requires Adapter Cable

$572.69

$171.81

-70%NEW
Thumbnail 1

B117 Bronze 0-deg Depth & Temp w/Ray Connector f/CP370 & DSM300

$428.79

$128.64

-70%NEW
Thumbnail 1

B175 Bronze Low Frequency 1kW Chirp Transducer 0-deg Tilt - Requires Mix & Match Cable

$1,686.51

$505.95

-70%NEW
Thumbnail 1

B285HW Bronze 1kW Wide Beam Chirp Thru-Hull Transducer - Requires Mix and Match Cable

$1,655.67

$496.70

-70%NEW
Thumbnail 1

TM185C-HW-MM CHIRP Transducer Transom Mount Needs Mix & Match Cable

$1,469.91

$440.97

-70%NEW
Thumbnail 1

B765C-LM Bronze CHIRP Transducer - Needs Mix & Match Cable - Does NOT Work w/Simrad & Lowrance

$1,500.75

$450.22

-70%NEW
Thumbnail 1

B45-DT-HB 600W Thru-Hull Transducer w/Fairing Block & Humminbird 9 Connector

$460.36

$138.11

-70%NEW
Thumbnail 1

R509C-LH CHIRP Transducer

$5,409.02

$1,622.71

-70%NEW
Thumbnail 1Thumbnail 2

TM185C-HW High Frequency Wide Beam CHIRP Transom Mount 14-Pin Transducer f/Humminbird

$1,562.43

$468.73

-70%NEW
Thumbnail 1Thumbnail 2

B785C-M CHIRP Bronze Thru-Hull w/Fairing Block - 600W

$1,091.79

$327.54

-70%NEW
Thumbnail 1

R599 Low/Med Frequency In-Hull Chirp Transducer Bare Wire

$6,338.55

$1,901.56

-70%NEW
Thumbnail 1

B265LM Bronze Chirp Thru-Hull Transducer 1kW w/Fairing Block - Mix & Match Cable Needed

$2,187.98

$656.39